Analyze the component datasheet / pinout / screenshot and my existing Flux schematic / symbol with current Terminal names.

Create a Flux table in this format:

| Pin | Name | Terminal | Section | Terminal Order |
| --: | ---- | -------- | ------- | -------------: |

Rules:

* Determine the correct Section for each pin yourself based on the datasheet and schematic usage.
* Assign the Terminal yourself, but if my existing Flux schematic already has a correct or logical Terminal name, use it.
* Do not use Pin Group.
* Power must always be the first block, Terminal Order = 1.
* Ground must always be the last block and use the last Terminal Order.
* All GND / AGND / DGND / PGND / VSS / AVSS / EPAD / Exposed Pad / Thermal Pad pins must use Section = Ground, not Power.
* Assign all other Sections and Terminal Orders yourself between Power and Ground.
* If a schematic Terminal does not match the datasheet, briefly mark it as needing rename.
* If a pin has shared / alternate functions, choose the function that matches the schematic usage.

Output:

1. Terminal Order table for this component.
2. Tables grouped by Section.
3. Power first, Ground last.
4. Short check: OK terminals / Rename needed / Uncertain.