# Supplemental current/provisional carrier population

Finite missing-body completion, not another enclosure repair. Native connector/component poses and the previous 115 solids remain unchanged. This supplements, not replaces, prior thickness and physical-fit caveats. No parent/layout/routing/manufacturing mutations.

## Eight formerly missing bodies represented
- OLED R2/R3 and encoder R6: detailed nominal KiCad R_Array_Convex_4x0603 STEP, 3.2x1.6x0.5mm. Model rotated90deg to match Eagle long axis/contact rows. Pin pitch is nominal library geometry, not a stock-specific solder qualification.
- OLED D1 and encoder D1/D2: detailed nominal KiCad LED_0603_1608Metric STEP,1.6x0.8x1.1mm; rotated-90deg to Eagle cathode/+Y. Exact manufacturer/height remains a stock qualification item.
- Encoder IC1: explicitly marked SOURCED ENVELOPE,4x4mm basic XY and0.9mm maximum seated height, per Microchip/Atmel42414GS page12. This is not detailed QFN or total XY tolerance geometry. It intentionally does not use the generic0.77mm-high KiCad QFN as a claimed maximum.
- Encoder LED1: explicitly marked SOURCED CONSERVATIVE BODY ENVELOPE for OPSCO SK6812MINI-E Rev02 page4. Body3.2x2.8mm, totalheight1.78mm, face-to-lead0.84mm, general tolerance+/-0.1mm. Envelope XY3.3x2.9mm; worst distance from leadplane=(1.78+0.1)-(0.84-0.1)=1.14mm. Symmetric+/-1.14mm about nominal rear-module lead seating plane conservatively covers both face conventions. This2.28mm envelope is NOT actual body thickness. Lead wings/crimp/solder fillets are not invented; lead detail remains absent. Source describes total lead span5.88mm, and the original Eagle land manifest remains available.

All placements come from byte-verified pinned Eagle sources: OLED51ef8e242dcf and encoder4b82c1319140. These eight are six detailed nominal packages plus two honest sourced envelopes, not eight exact stock models.

## Geometry evidence
Independent reimport:123 valid solids. Bounds STEP mm X10..115,Y-52..-10,Z-7.285..29.5986. GLB meters,Y-up: [0.010,-0.007285,0.010]..[0.115,0.0295986,0.052]. Eight added shapes tested vs prior assembly plus all28 pairs among additions:36 exact distance/common-volume checks; no common volume above1e-6mm3 numerical threshold. These checks DO NOT prove package solder geometry, production clearances or enclosure fit. Only added geometry checked; prior whole-assembly checks not rerun.
Read-only native layout confirms J1 bottom(2.5,-14),J2(-49.555,-0.793)rot270,J3(49.555,0)rot90. No inward-facing proposal has been applied.

## SH mating result for proposal screening
JST SH catalog printedp3: SHR-04V-S without protrusions: circuit pitch1mm, B(width)5mm, plug axiallength5mm, max transverse thickness2.8mm (reduced region2.1mm). Header bodydepth4.25mm. Printedp5 assembly drawing: side-entry mated housing length6.25mm, height2.95mm.
Derived nominal protrusion beyond header mating face=6.25-4.25=2.00mm; nominal insertion=5.00-2.00=3.00mm. From header-body center, mated tip reach=4.25/2+2=4.125mm. Copper-tail/footprint origin is NOT automatically header-body center; library connector has offset origins.
Against layout's reported5.4mm allowable protrusion: margin3.4mm if from face,1.275mm if from bodycenter. This resolves the length screen only. No placement-based collision result claimed for proposed J2(1,-5.5)/J3(6,5.5), which remain unapproved/unmoved. Cable exit/bends and 5mm opposed-module gap still need checking. Catalog explicitly calls assembly dimensions guidelines and requests JST details; no tolerance guarantees inferred.
A separate5x5x2.8mm nominal SH exterior envelope is provided, NOT detailed mating CAD and NOT installed in the assembly. No imaginary cavities/lances or insertion poses were created.

## Bounded CAD and cable sourcing / residual blockers
- JST manufacturer Japan page: earlier403; alternate JST America SH page alsoHTTP403. Web scraper confirms downloadable products but cannot expose download hrefs.
- GrabCAD JST-SH SMD connectors by Denis Silivanov: library/files fetchHTTP403. Public Libre Space Foundation PQ9ISH repository cloned successfully; it credits that library but contains SM04B/SM06B header STEP only, no SHR plug. PartGenie offers CAD behind login/paid add-on; no purchase/access action taken. Random marketplace mirrors not accepted as authoritative CAD.
- Therefore detailed SHR-04V-S solid/cavities/contacts remain unavailable through these bounded routes; this is an access/source gate, NOT lack of a physical sample. Options: manufacturer download supplied by user/lead, authorized CAD access, or continue nominal envelope screening using catalog dimensions.
- Actual XHP-4 housing STEP was already acquired and remains in previous output xhp4-uninstalled.step. No new XH mating pose or contacts/wires invented. Crimp-contact detail, mating/retention validation remains incomplete.
- Adafruit4399 official product page does NOT specify wire AWG, insulation OD or minimum bend radius. JST SH contact catalog permits AWG32..28 and insulationOD0.4..0.8mm; that is connector compatibility, NOT actual Adafruit cable diameter. No actual minimum bend radius found. Do not promote generic wire bend rules or other-vendor cable OD to4399 facts.
- Still absent from installed assembly: SH/XH plug bodies and contacts, cables, detailed reverseLED leads/QFN terminals, PEC11 terminals/tabs/nut/washer, fasteners, OLED flex/adhesive. Knob bore/installed height remain unknown. No new installed knob.
- Parent enclosure, bezel/window, attachment/tolerance/push-load/sweep checks remain independently owned and unattempted here. Stock-specific passive/LED/array dimensions still unqualified. Board thickness reconciliation remains1.4986core,1.5686withCu,1.6186withmask versus1.6target; no stretch.

## Datum (unchanged)
STEP point(Xs,Ys,Zs): child=(Xs-62.5,Ys+31),zRelativeFront=Zs-1.4986.
O=(0,-57.5,61.5),theta=67.13549deg,V=(0,cos(theta),sin(theta)),N=(0,-sin(theta),cos(theta)).
Pworld=O+(Xs-60)Xhat+(Ys+31)V+(Zs-16.0986)N.
Carrierfrontn=-14.6; module rear/frontn=-9.6/-8; childx=parentu-2.5. Parent not edited.

## Sources
- https://github.com/KiCad/kicad-packages3D/tree/b8b3cfdfad88ba66f21002b3de51dc6f7d55ba5a : Resistor_SMD.3dshapes/R_Array_Convex_4x0603.step, LED_SMD.3dshapes/LED_0603_1608Metric.step
- https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/Atmel-42414-SAM-D09_Summary.pdf page12
- https://cdn-shop.adafruit.com/product-files/4960/4960_SK6812MINI-E_REV02_EN.pdf page4
- JST catalog copy: https://jon-harper.github.io/clockmaker-project/assets/datasheets/jst_sh.pdf printedpages3/5; https://www.jst-mfg.com/product/index.php?series=231 confirms official series.
- https://www.jst.com/products/crimp-style-connectors-wire-to-board-type/sh-connector/ (403)
- https://grabcad.com/library/jst-sh-smd-connectors-1/files (403)
- https://gitlab.com/librespacefoundation/pq9ish/pq9ish-comms-vu-hw (headers only)
- https://www.partgenie.ai/parts/shr-04v-s-mfg-001261 (login/paid CAD)
- https://www.adafruit.com/product/4399 (actual cable OD/bend unavailable)

Editable supplemental script and source/input bundle preserve all original geometry as imported B-rep (NOT converted to parametric features). Run supplemental/supplement.py with build123d from the extracted bundle. Source hashes and per-body transforms/bounds in supplement-verification.json.
HEATER: DO NOT ENERGIZE.
