ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('HTSSOP-16_L5.0-W4.4-H1.2-LS6.4-P0.65.step', '2022-07-26T09:49:26', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#16 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #24, 'distance_accuracy_value', 'NONE');
#22 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#24 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#26 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#64 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #16 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #24, #22, #26 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#225 = PRODUCT_DEFINITION ( 'δ֪', '', #46608, #11179 ) ;
#2759 = PRODUCT ( 'HTSSOP-16_L5.0-W4.4-H1.2-LS6.4-P0.65', 'HTSSOP-16_L5.0-W4.4-H1.2-LS6.4-P0.65', '', ( #31553 ) ) ;
#3247 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #225 ) ;
#11179 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #15035, 'design' ) ;
#13379 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #15035 ) ;
#15035 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#16576 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #18733 ) ;
#18733 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#28111 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #2759 ) ) ;
#31553 = PRODUCT_CONTEXT ( 'NONE', #18733, 'mechanical' ) ;
#46608 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #2759, .NOT_KNOWN. ) ;
ENDSEC;
END-ISO-10303-21;