ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('HTSSOP-24_L7.8-W4.4-P0.65-LS6.4-TL-EP.step', '2022-07-26T09:51:28', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#3 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #9 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #109, #50, #17 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#9 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #109, 'distance_accuracy_value', 'NONE');
#17 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#50 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#109 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#1042 = PRODUCT_DEFINITION ( 'δ֪', '', #15919, #32055 ) ;
#1736 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #1042 ) ;
#2435 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#9701 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #2435 ) ;
#15919 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #26755, .NOT_KNOWN. ) ;
#18044 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#20191 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #26755 ) ) ;
#20904 = PRODUCT_CONTEXT ( 'NONE', #2435, 'mechanical' ) ;
#26755 = PRODUCT ( 'HTSSOP-24_L7.8-W4.4-P0.65-LS6.4-TL-EP', 'HTSSOP-24_L7.8-W4.4-P0.65-LS6.4-TL-EP', '', ( #20904 ) ) ;
#28721 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #18044 ) ;
#32055 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #18044, 'design' ) ;
ENDSEC;
END-ISO-10303-21;