ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('PG-DSO-14-1_L8.8-W4.0-H1.8-P1.27-LS6.0-BL.step', '2022-07-08T08:22:27', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#1 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#20 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #60 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #49, #1, #96 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#49 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#60 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #49, 'distance_accuracy_value', 'NONE');
#96 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#892 = PRODUCT_CONTEXT ( 'NONE', #10585, 'mechanical' ) ;
#1732 = PRODUCT ( 'PG-DSO-14-1_L8.8-W4.0-H1.8-P1.27-LS6.0-BL', 'PG-DSO-14-1_L8.8-W4.0-H1.8-P1.27-LS6.0-BL', '', ( #892 ) ) ;
#2640 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#3653 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #10585 ) ;
#3795 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #1732, .NOT_KNOWN. ) ;
#3945 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #4854 ) ;
#4422 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #1732 ) ) ;
#4854 = PRODUCT_DEFINITION ( 'δ֪', '', #3795, #6876 ) ;
#6876 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #2640, 'design' ) ;
#8896 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #2640 ) ;
#10585 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
ENDSEC;
END-ISO-10303-21;