ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('SO-14_L10.2-W5.3-P1.27-LS7.8-BL-1.step', '2022-07-29T06:40:59', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#10 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#33 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#35 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #88 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #45, #10, #33 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#45 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#88 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #45, 'distance_accuracy_value', 'NONE');
#5352 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #8046 ) ) ;
#8046 = PRODUCT ( 'SO-14_L10.2-W5.3-P1.27-LS7.8-BL-1', 'SO-14_L10.2-W5.3-P1.27-LS7.8-BL-1', '', ( #10456 ) ) ;
#10456 = PRODUCT_CONTEXT ( 'NONE', #11748, 'mechanical' ) ;
#11748 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#12625 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #21096 ) ;
#13568 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #17466 ) ;
#16477 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #11748 ) ;
#17466 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#18127 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #8046, .NOT_KNOWN. ) ;
#19575 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #17466, 'design' ) ;
#21096 = PRODUCT_DEFINITION ( 'δ֪', '', #18127, #19575 ) ;
ENDSEC;
END-ISO-10303-21;