ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('SFW_R-1ST_LF','2009-06-09T',(''),('FCI - CDC Division'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2008010', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2008010','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#27206=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#27207=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#27208=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#27209=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #27208);
#27210=(CONVERSION_BASED_UNIT('DEGREE',#27209)NAMED_UNIT(#27207)PLANE_ANGLE_UNIT());
#27211=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#27212=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.838674393014E-3),#27206, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#27213=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #27212))GLOBAL_UNIT_ASSIGNED_CONTEXT((#27206,#27210,#27211))REPRESENTATION_CONTEXT('ID1','3'));
#27215=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#27216=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#27215);
#27217=DESIGN_CONTEXT('',#27215,'design');
#27218=MECHANICAL_CONTEXT('',#27215,'mechanical');
#27219=PRODUCT('SFW_R-1ST_LF','SFW_R-1ST_LF','NOT SPECIFIED',(#27218));
#27220=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #27219,.MADE.);
#27224=PRODUCT_CATEGORY('part','');
#27225=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#27219));
#27221=PRODUCT_DEFINITION('design','',#27220,#27217);
#27222=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR SFW_R-1ST_LF.',#27221);
ENDSEC;
END-ISO-10303-21;