ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('DFN3030_L3.0-W3.0-P0.65-BL-EP.step', '2022-06-30T13:42:41', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#2 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#43 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #74 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #2, #52, #81 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#52 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#74 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #2, 'distance_accuracy_value', 'NONE');
#81 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#5933 = PRODUCT_DEFINITION ( 'δ֪', '', #7202, #10835 ) ;
#7202 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #13759, .NOT_KNOWN. ) ;
#8275 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #12978 ) ;
#10835 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #13795, 'design' ) ;
#12298 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #13759 ) ) ;
#12390 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #13795 ) ;
#12978 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#13759 = PRODUCT ( 'DFN3030_L3.0-W3.0-P0.65-BL-EP', 'DFN3030_L3.0-W3.0-P0.65-BL-EP', '', ( #14597 ) ) ;
#13795 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#14597 = PRODUCT_CONTEXT ( 'NONE', #12978, 'mechanical' ) ;
#15358 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #5933 ) ;
ENDSEC;
END-ISO-10303-21;