ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('UQFN-48_L6.0-W6.0-H0.5-P0.40-BL-EP4.6.step', '2022-07-15T04:02:40', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#3 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#9 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #34 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #82, #92, #3 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#34 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #82, 'distance_accuracy_value', 'NONE');
#82 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#92 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#11236 = PRODUCT_DEFINITION ( 'δ֪', '', #37119, #23060 ) ;
#13613 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #11236 ) ;
#21421 = PRODUCT_CONTEXT ( 'NONE', #24580, 'mechanical' ) ;
#23060 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #27800, 'design' ) ;
#24580 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#27800 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#32266 = PRODUCT ( 'UQFN-48_L6.0-W6.0-H0.5-P0.40-BL-EP4.6', 'UQFN-48_L6.0-W6.0-H0.5-P0.40-BL-EP4.6', '', ( #21421 ) ) ;
#33816 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #24580 ) ;
#34450 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #32266 ) ) ;
#37119 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #32266, .NOT_KNOWN. ) ;
#44910 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #27800 ) ;
ENDSEC;
END-ISO-10303-21;