(module easyeda2kicad:SW-TH_6P-L10.0-W9.8-P2.54_MDR-10H1 (layer F.Cu) (tedit 5DC5F6A4)
	(attr through_hole)
	(fp_text reference REF** (at 0 -5.27) (layer F.SilkS)
		(effects (font (size 1 1) (thickness 0.15)))
	)
	(fp_text value SW-TH_6P-L10.0-W9.8-P2.54_MDR-10H1 (at 0 5.27) (layer F.Fab)
		(effects (font (size 1 1) (thickness 0.15)))
	)
	(fp_text user %R (at 0 0) (layer F.Fab)
		(effects (font (size 1 1) (thickness 0.15)))
	)
	(fp_line (start 3.46 5.87) (end 3.46 8.07) (layer F.SilkS) (width 0.25))
	(fp_line (start 1.23 5.87) (end 1.23 8.07) (layer F.SilkS) (width 0.25))
	(fp_line (start -1.52 5.87) (end -1.52 8.07) (layer F.SilkS) (width 0.25))
	(fp_line (start -3.38 5.87) (end -3.38 8.07) (layer F.SilkS) (width 0.25))
	(fp_line (start 5.08 8.07) (end -5.08 8.07) (layer F.SilkS) (width 0.25))
	(fp_line (start -5.08 8.07) (end -5.08 7.36) (layer F.SilkS) (width 0.25))
	(fp_line (start 5.08 5.87) (end -5.08 5.87) (layer F.SilkS) (width 0.25))
	(fp_line (start 5.08 -1.73) (end 5.08 8.07) (layer F.SilkS) (width 0.25))
	(fp_line (start -3.46 -1.73) (end -5.08 -1.73) (layer F.SilkS) (width 0.25))
	(fp_line (start -5.08 -1.73) (end -5.08 7.36) (layer F.SilkS) (width 0.25))
	(fp_line (start -0.92 -1.73) (end -1.62 -1.73) (layer F.SilkS) (width 0.25))
	(fp_line (start 1.62 -1.73) (end 0.92 -1.73) (layer F.SilkS) (width 0.25))
	(fp_line (start 5.08 -1.73) (end 3.46 -1.73) (layer F.SilkS) (width 0.25))
	(pad 8 thru_hole circle (at -2.54 -1.27 0.00) (size 1.60 1.60) (layers *.Cu *.Mask)(drill 0.9999979999999999))
	(pad C thru_hole circle (at 0.00 -1.27 0.00) (size 1.60 1.60) (layers *.Cu *.Mask)(drill 0.9999979999999999))
	(pad 2 thru_hole circle (at 2.54 -1.27 0.00) (size 1.60 1.60) (layers *.Cu *.Mask)(drill 0.9999979999999999))
	(pad 4 thru_hole circle (at 2.54 1.27 0.00) (size 1.60 1.60) (layers *.Cu *.Mask)(drill 0.9999979999999999))
	(pad C thru_hole circle (at 0.00 1.27 0.00) (size 1.60 1.60) (layers *.Cu *.Mask)(drill 0.9999979999999999))
	(pad 1 thru_hole rect (at -2.54 1.27 0.00) (size 1.60 1.60) (layers *.Cu *.Mask)(drill 0.9999979999999999))
	(fp_circle (center -5.00 8.07) (end -4.97 8.07) (layer F.Fab) (width 0.06))
	(model "/Users/natarius/Downloads/lcsc_staging/outputs/kicad_parts/MDR-06H1/MDR-06H1.3dshapes/SW-TH_6P-L10.0-W9.8-P2.54_MDR-10H1.wrl"
		(offset (xyz 0.000 -3.150 0.000))
		(scale (xyz 1 1 1))
		(rotate (xyz 0 0 0))
	)
)