ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('MSOP-12_L4.0-W3.0-H1.1-P0.65-LS4.9-BL.step', '2022-07-26T09:56:55', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#4 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#7 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #11 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #156, #4, #37 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#11 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #156, 'distance_accuracy_value', 'NONE');
#37 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#156 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#1152 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#1659 = PRODUCT_CONTEXT ( 'NONE', #11090, 'mechanical' ) ;
#2447 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #19932, .NOT_KNOWN. ) ;
#3114 = PRODUCT_DEFINITION ( 'δ֪', '', #2447, #19362 ) ;
#8752 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #1152 ) ;
#11090 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#12064 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #19932 ) ) ;
#17578 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #11090 ) ;
#19045 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #3114 ) ;
#19362 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #1152, 'design' ) ;
#19932 = PRODUCT ( 'MSOP-12_L4.0-W3.0-H1.1-P0.65-LS4.9-BL', 'MSOP-12_L4.0-W3.0-H1.1-P0.65-LS4.9-BL', '', ( #1659 ) ) ;
ENDSEC;
END-ISO-10303-21;