ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('PG-DSO-19_L12.8-W7.6-P1.27-LS10.3-BL.step', '2022-07-08T08:23:14', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#9 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #116, 'distance_accuracy_value', 'NONE');
#33 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#46 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#102 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #9 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #116, #46, #33 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#116 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#8078 = PRODUCT ( 'PG-DSO-19_L12.8-W7.6-P1.27-LS10.3-BL', 'PG-DSO-19_L12.8-W7.6-P1.27-LS10.3-BL', '', ( #21479 ) ) ;
#10341 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#10372 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #15558 ) ;
#13990 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#14512 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #8078 ) ) ;
#15410 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #8078, .NOT_KNOWN. ) ;
#15558 = PRODUCT_DEFINITION ( 'δ֪', '', #15410, #18527 ) ;
#15808 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #13990 ) ;
#18446 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #10341 ) ;
#18527 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #10341, 'design' ) ;
#21479 = PRODUCT_CONTEXT ( 'NONE', #13990, 'mechanical' ) ;
ENDSEC;
END-ISO-10303-21;