ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('ASM0001_ASM','2018-12-10T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2007090', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2007090','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#75548=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#75549=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#75550=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#75549);
#75551=(CONVERSION_BASED_UNIT('INCH',#75550)LENGTH_UNIT()NAMED_UNIT(#75548));
#75552=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#75553=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#75554=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #75553);
#75555=(CONVERSION_BASED_UNIT('DEGREE',#75554)NAMED_UNIT(#75552)PLANE_ANGLE_UNIT());
#75556=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#75557=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.670831348169E-3),#75551, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#75558=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #75557))GLOBAL_UNIT_ASSIGNED_CONTEXT((#75551,#75555,#75556))REPRESENTATION_CONTEXT('ID1','3'));
#75560=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#75561=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#75560);
#75562=DESIGN_CONTEXT('',#75560,'design');
#75563=MECHANICAL_CONTEXT('',#75560,'mechanical');
#75564=PRODUCT('ASM0001_ASM','ASM0001_ASM','NOT SPECIFIED',(#75563));
#75565=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #75564,.MADE.);
#75569=PRODUCT_CATEGORY('part','');
#75570=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#75564));
#75566=PRODUCT_DEFINITION('design','',#75565,#75562);
#75567=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR ASM0001_ASM.',#75566);
ENDSEC;
END-ISO-10303-21;