ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('PLCC-44_L16.6-W16.6-P1.27-LS17.5-L.step', '2022-07-08T04:04:46', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#9 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#31 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#33 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #44 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #31, #9, #39 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#39 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#44 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #31, 'distance_accuracy_value', 'NONE');
#1213 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #40874, .NOT_KNOWN. ) ;
#7158 = PRODUCT_CONTEXT ( 'NONE', #33371, 'mechanical' ) ;
#7837 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #17442 ) ;
#17442 = PRODUCT_DEFINITION ( 'δ֪', '', #1213, #17566 ) ;
#17566 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #21207, 'design' ) ;
#19747 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #33371 ) ;
#21207 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#21376 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #21207 ) ;
#21770 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #40874 ) ) ;
#33371 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#40874 = PRODUCT ( 'PLCC-44_L16.6-W16.6-P1.27-LS17.5-L', 'PLCC-44_L16.6-W16.6-P1.27-LS17.5-L', '', ( #7158 ) ) ;
ENDSEC;
END-ISO-10303-21;