ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('PLCC-32_L14.0-W11.4-P1.27-LS15.0-T.step', '2022-07-08T04:04:06', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#13 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#25 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#96 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #143 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #134, #25, #13 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#134 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#143 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #134, 'distance_accuracy_value', 'NONE');
#4172 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #25946 ) ) ;
#23019 = PRODUCT_CONTEXT ( 'NONE', #32792, 'mechanical' ) ;
#25765 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#25946 = PRODUCT ( 'PLCC-32_L14.0-W11.4-P1.27-LS15.0-T', 'PLCC-32_L14.0-W11.4-P1.27-LS15.0-T', '', ( #23019 ) ) ;
#26194 = PRODUCT_DEFINITION ( 'δ֪', '', #46597, #34647 ) ;
#31385 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #32792 ) ;
#32792 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#34647 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #25765, 'design' ) ;
#42938 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #26194 ) ;
#45133 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #25765 ) ;
#46597 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #25946, .NOT_KNOWN. ) ;
ENDSEC;
END-ISO-10303-21;