ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('DIP-8_L9.8-W7.1-H4.5-P2.54-LS8.8-BL.step', '2022-06-21T14:16:47', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#1 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#7 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#35 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #1, 'distance_accuracy_value', 'NONE');
#38 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#170 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #35 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1, #38, #7 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#1005 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '�κ�', '', #4729, .NOT_KNOWN. ) ;
#4352 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#4729 = PRODUCT ( 'DIP-8_L9.8-W7.1-H4.5-P2.54-LS8.8-BL', 'DIP-8_L9.8-W7.1-H4.5-P2.54-LS8.8-BL', '', ( #10690 ) ) ;
#4843 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #13674 ) ;
#7690 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #13674, 'design' ) ;
#8772 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #4352 ) ;
#9447 = PRODUCT_DEFINITION ( 'δ֪', '', #1005, #7690 ) ;
#10690 = PRODUCT_CONTEXT ( 'NONE', #4352, 'mechanical' ) ;
#11157 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #9447 ) ;
#13674 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#17789 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #4729 ) ) ;
ENDSEC;
END-ISO-10303-21;