ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('74390','2009-07-08T',(''),('FCI - ELX Division'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2008010', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2008010','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#21677=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#21678=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#21679=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#21680=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #21679);
#21681=(CONVERSION_BASED_UNIT('DEGREE',#21680)NAMED_UNIT(#21678)PLANE_ANGLE_UNIT());
#21682=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#21683=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.319769922459E-4),#21677, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#21684=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #21683))GLOBAL_UNIT_ASSIGNED_CONTEXT((#21677,#21681,#21682))REPRESENTATION_CONTEXT('ID1','3'));
#21686=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#21687=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#21686);
#21688=DESIGN_CONTEXT('',#21686,'design');
#21689=MECHANICAL_CONTEXT('',#21686,'mechanical');
#21690=PRODUCT('74390','74390','NOT SPECIFIED',(#21689));
#21691=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('2','LAST_VERSION', #21690,.MADE.);
#21695=PRODUCT_CATEGORY('part','');
#21696=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#21690));
#21692=PRODUCT_DEFINITION('design','',#21691,#21688);
#21693=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 74390.',#21692);
ENDSEC;
END-ISO-10303-21;