ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('438600004','2019-03-11T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2016010', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2016010','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#18202=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#18204=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#18203);
#18205=(CONVERSION_BASED_UNIT('INCH',#18204)LENGTH_UNIT()NAMED_UNIT(#18202));
#18208=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #18207);
#18209=(CONVERSION_BASED_UNIT('DEGREE',#18208)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#18211=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-3),#18205,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#18212=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #18211))GLOBAL_UNIT_ASSIGNED_CONTEXT((#18205,#18209,#18210))REPRESENTATION_CONTEXT('ID1','3'));
#18218=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#18219=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#18218);
#18220=DESIGN_CONTEXT('',#18218,'design');
#18221=MECHANICAL_CONTEXT('',#18218,'mechanical');
#18222=PRODUCT('438600004','438600004','NOT SPECIFIED',(#18221));
#18223=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('8','LAST_VERSION', #18222,.MADE.);
#18227=PRODUCT_CATEGORY('part','');
#18228=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#18222));
#18203=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#18207=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#18210=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#18224=PRODUCT_DEFINITION('design','',#18223,#18220);
#18225=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 438600004.',#18224);
ENDSEC;
END-ISO-10303-21;