ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('194280015','2014-03-20T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2011490', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2011490','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#18348=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#18350=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#18349);
#18351=(CONVERSION_BASED_UNIT('INCH',#18350)LENGTH_UNIT()NAMED_UNIT(#18348));
#18354=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #18353);
#18355=(CONVERSION_BASED_UNIT('DEGREE',#18354)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#18357=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.283407147206E-4),#18351, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#18358=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #18357))GLOBAL_UNIT_ASSIGNED_CONTEXT((#18351,#18355,#18356))REPRESENTATION_CONTEXT('ID1','3'));
#18364=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#18365=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#18364);
#18366=DESIGN_CONTEXT('',#18364,'design');
#18367=MECHANICAL_CONTEXT('',#18364,'mechanical');
#18368=PRODUCT('194280015','194280015','NOT SPECIFIED',(#18367));
#18369=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #18368,.MADE.);
#18373=PRODUCT_CATEGORY('part','');
#18374=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#18368));
#18349=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#18353=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#18356=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#18370=PRODUCT_DEFINITION('design','',#18369,#18366);
#18371=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 194280015.',#18370);
ENDSEC;
END-ISO-10303-21;